Scan 34
How to make a violin. And Violin notes by Ole Bull, 1900
7 lines. Read by computer on 3 September 2026, twice; the two readings disagreed in places. Printed page 20. See the scan on archive.org.
1measuring 3 inches from A to B. C should be 1 inch thick. In using these hand-screws, a piece of cloth must be put on the violin to prevent marks of any kind.
3A clip of wood shaped like a clothes-peg, Fig. 15, 1 inch wide at A, 2 inches from point to point at B, its length is 9 inches and its thickness 3/8 inch, and is used for glueing in the bass bar, five of these being required. It should be made of hard wood. one of two readings
4A clip of wood shaped like a clothes-peg, Fig. 15, 1 inch wide at A, 2 inches from point to point at B, its length is 9 inches and its thickness \( \frac{3}{8} \) inch, and is used for glueing in the bass bar, five of these being required. It should be made of hard wood. one of two readings
6Another clip of a similar kind, but only 2 inches long. The inner surfaces of these
The computer misreads some letters and numbers. Where a name matters to you, read the scan.