Scan 46
How to make a violin : The violin, its construction practically treated, 1892
8 lines. Read by computer on 3 September 2026. Printed page 32. See the scan on archive.org.
1places. These blocks must be of pine, of perfectly even grain, and a trifle over 1 and 1-4 inch high to allow for trimming. The blocks should fit perfectly in their inlets, and their grain and that of the corner blocks also must run across the instrument. This gives solidity to the body.
3
5The blocks being prepared, put a mere spot of glue on the edge of the mould in each of the six inlets, and fix the pieces of pine so that they all stand exactly at the same height. They should project beyond the surface of the mould underneath, but only 1-16th of an inch.
7When the glue is dry, trim off with the knife and file the projecting 1-16th of an
The computer misreads some letters and numbers. Where a name matters to you, read the scan.