Bow & Bridge Violin and bow makers, as the old books printed them

Books › Old violins, 1905 › scan 231

Scan 231

Old violins, 1905

12 lines. Read by computer on 27 September 2026. Printed page 209. See the scan on archive.org.

1rosewood, which is less dense, and thus, in contact with the maple-head (which is again less dense in fibre than the rosewood), offers a less hard and violent contrast than does the iron ebony to the porous maple.
3But the all-essential thing is for the pegs to be nicely fitted, and it is a vile practice to rosin the pegs to make them stiffer, or to rub them with lead-pencil or whitening to make them turn more easily.
5If your peg sticks, it is either because it does not fit the hole, is not smooth, or because you have rammed it in too far in order to resist the pull of a string, probably coiled round and round the pegs in a tangled, twisted mess.
7There never should be a need for this over-ramming in of the screw, nor would there be if, when you pulled up your new string to pitch, you immediately let it down, drew the stretched part tight, and then screwed up again, when you would find, instead of ever so many coils, you had reduced the number to one or two, which would at once lift the strain from your screw, and make it needless for you to force it in till it stuck and almost refused to move at all.
9You should be able, when your fiddle is at your chin, to nip the peghead between the first and third joint of your forefinger, and adjust the pitch to a nicety and in a moment; but then the resistance of the screw must be so nicely balanced with the tension of the string as to allow of its moving easily when gripped, and keeping in its exact place when left.
11It is a very strange thing that, whilst all sorts of

The computer misreads some letters and numbers. Where a name matters to you, read the scan.