Bow & Bridge Violin and bow makers, as the old books printed them

Scan 24

The Repairing & Restoration of Violins, 1903

10 lines. Read by computer on 3 September 2026. Printed page 10. See the scan on archive.org.

1preparation or melting of the glue—simplest of processes—some pieces of selected glue put into a small glazed gallipot with two-thirds of clean water and left to soak during the night will only require warming in the morning by placing the pot in a larger one and surrounding it with hot water. The quantity of glue being varied according to requirement is far preferable to the old-fashioned iron glue-pot which darkens the glue and is in other ways objectionable. If the injury or want of adhesion extends only to a trifling distance round the edge and has happened at a time when good glue and proper appliances are not to hand, the routine pursued must still be the same
3![Diagram 1](../images/diagram_1.png)
5DIAGRAM 1.
7as if they were; first by obtaining a well-worn table knife, the thinner the better (but if the household knives happen to be new and strong you may call on some artist friend, borrow his palette knife, clean it, have ready some clear water, a cushion or a substitute, and some rather thick gum). If time will allow, the strings should be taken off the violin, and then placing it face downwards on the cushion, the knife having been dipped in the water, can be inserted gently at the part requiring attention. (Diagram 1.)
9You will soon tell by the sound in moving the knife about whether the separation has been recent or of long

The computer misreads some letters and numbers. Where a name matters to you, read the scan.