Books › The Violin: A concise exposition of the general principles of construction.., 1871 › scan 92
Scan 92
The Violin: A concise exposition of the general principles of construction.., 1871
8 lines. Read by computer on 28 September 2026. No printed page number was found. See the scan on archive.org.
1well as any other purpose where neatness combined with strength is required. For the Violin it is quite essential that the finest glue must be employed, as the instrument has to withstand so many vicissitudes of temperature, vibration, &c.; and it is certainly not very gratifying to have it constantly requiring repairs from the cause of bad glueing.
3A small glue pot of copper or cast iron, with a tinned interior vessel, may be obtained for a trifling sum, and will be found quite suitable for the various operations of Violin making. The glue is first broken into small pieces, and steeped for an hour or two in cold water after which it will be found to dissolve more readily in the subsequent operation. Pour off the water, and place the now swelled glue into the interior vessel of the glue pot, along with a small quantity of water; fill up the outer vessel with water, and insert the one containing the glue, allowing the superfluous water to escape, then place on the fire until the glue thoroughly dissolves, and gradually fill up with water until the liquid is about the consistency of olive oil. A small brush and thin piece of pinewood are all that is required for spreading it upon the surfaces of the articles to be united.
5If this species of glue is used, care should be taken not to overheat it. A small quantity of spirits along with a few drops of creosote, may be advantageously added to the solution, as this tends to strengthen it; and by this method it will also keep from mould.
7The two halves of the back being now properly jointed, place one in the bench vice, joint side
The computer misreads some letters and numbers. Where a name matters to you, read the scan.