Scan 41
The violin: its famous makers and their imitators, 1875
2 lines. Read by computer on 1 October 2026. Printed page 11. See the scan on archive.org.
1very general, and there is every reason to believe that Brescia was the first place where such woods were used. It is possible that the makers who chose them for the sides and backs of their instruments considered it desirable to have material more akin to that adopted for the bellies, which was the finest description of pine, and that the result was found to be a tone of great mellowness. If they used these woods with this intention their calculations were undoubtedly correct. They appear to have worked these woods with but few exceptions for their Violas, Violoncellos, and Double Basses, while they adopted the harder woods for their Violins, all which facts tend to show that these rare old makers did not consider soft wood eligible for the back and sides of the leading instrument; and later experiments have shown them to have arrived at a correct conclusion on this point. The experiments necessary to obtain these results have been effected by cutting woods of several kinds and qualities into various sizes so as give the sounds of a diatonic scale. By comparing the intensity and quality of tone produced by each sample of wood, sycamore has been found to surpass the rest. The Cremonese makers seem to have adhered chiefly to the use of sycamore or maple, varying the manner of cutting it. First they made the back in one piece, technically known as a "whole back;" secondly the back in two parts; thirdly, the cutting known as the "slab back." There being considerable doubt as to the mode of dividing the
The computer misreads some letters and numbers. Where a name matters to you, read the scan.