Scan 84
The violin: its famous makers and their imitators, 1884
2 lines. Read by computer on 3 September 2026. Printed page 34. See the scan on archive.org.
1We may now pass to the consideration of the various constituent parts of a Violin. It will be found, if a Violin be taken to pieces, that it is constructed of no less than fifty-eight separate parts, an astonishing number of factors for so small and simple-looking an instrument. The back is made of maple or sycamore, in one or two parts; the belly of the finest quality of Swiss pine, and from a piece usually divided; the sides, like the back, of maple, in six pieces, bent to the required form by means of a heated iron; the linings, which are used to secure the back and belly to the sides, are twelve in number sometimes made of lime-tree, but also of pine. The bass or sound-bar, is of pine, placed under the left foot of the bridge in a sightly oblique position, in order to facilitate the vibration by giving about the same position as the line of the strings. The divergence is usually one-twelfth of an inch, throughout its entire length of ten inches. It is curious to discover that this system of placing the bar was adopted by Brensius of Bologna, a Viol-maker of the fifteenth century, and by Gasparo da Salò. The later Violin-makers, however, for the most part, do not appear to have followed the example, they having placed it in a straight line, thus leaving the system to be re-discovered. The bar of the Violin not only serves the purpose of strengthening the instrument in that part where the pressure of the bridge is greatest, but forms a portion of the structure at once curious and deeply inter-
The computer misreads some letters and numbers. Where a name matters to you, read the scan.